ARGO VEHICLES LTD for Off Road or On Water Work or Recreation Lyon Way, St Albans, Herts. AL4 0LQ. Tel. 01727 851222  HOME   ABOUT US   PRODUCTS   ACCESSORIES   FAQS   CONTACT US  Centaur 954G - Petrol 8x8 Avenger 750Hdi 8x8 Avenger 700HD 8x8 Avenger 700 HDEU 8x8 Frontier 650 6x6 650 HD 6x6 Frontier 650 6x6 Frontier 580   Centaur 954G Centaur 954DT - Tundra - Blue - Black - Yellow - Red Click on the images below to view larger size View Accessories Available Model Information 8 wheel drive amphibious utility vehicle with a liquid-cooled 3 cylinder B&SD Naturally Aspirated Gasoline engine producing 31 HP at 3600 rpm and 50.5 ft lbs of torque at 2200 rpm. Mid engine and transmission design, fully enclosed occupant ROPS cab, 10 cubic ft rear cargo area and 1500 lb payload capacity. Optional 34 HP engine available Features Automotive steering, brake and accelerator controls Conventional "H" pattern HI, LOW and REV shift control Insulated cab with front and rear windshield, wiper and roof Low fuel consumption even under severe load conditions Standard Equipment 12 Volt outlet for portable equipment Full skid plate for lower body protection Voltmeter, Hour Meter, Coolant Temperature, Tachometer, Fuel Level Low oil pressure, low electrical Warning Lights Manually controlled choke Swing out steel frame, canvas wrapped doors 25" Goodyear Rawhide III Tyres Specifications Engine DM 950G (Gasoline) Briggs & Stratton Daihatsu Type Naturally aspirated gasoline in-line 3 cylinder, 4 cycle, liquid cooled Horsepower 31 @ governed 3600 rpm Displacement 952 cc (58 cu in) Torque 50.5 ft. lbs. @ 2200 rpm Electrical 12 volt, 60 amp alternator, 600 CCA battery, dash mounted manual choke Brakes Foot pedal operated hydraulic disc brakes with hand lever operated mechanical parking brake Steering Hydrostatic skid steering Driver Controls Conventional automotive type steering wheel, brake pedal and foot throttle; dash mounted key operated ignition/starter switch, high/low beam headlamp switch, tachometer/hourmeter, fuel level and coolant temperature gauges; warning lights for low oil pressure and low electrical charge rate. Clutch and Transmission Continuously variable belt driven torque converter (CVT). High and low range forward, neutral and reverse transmission controlled by a conventional shift pattern range selector. Final Drive System RC60 roller chains from transmission to eight 1.59" (40mm) diameter axles. Fully adjustable tensioner for each drive chain. Tapered roller bearings in an oil bath support each axle. Frame Powder coated, 3 inch tubular steel, lower body support pan, welded construction. FEA analyzed for strength and durability. Body Vacuum formed lower hull and standard full skip plate formed from high density polyethelene (HDPE) Load Capacity - On Land 1500 lbs/680 kg Load Capacity - On Water 700 lbs/320 kg Towing Capacity 2000 lbs/907 kg of drawbar pull Seating Capacity Front bench seat for two persons on land/ two persons on water Fuel Capacity 12.6 U.S. gal./48 litres providing approx. 10 hours of operation Speed - On Land 28 mph/45 km/h Speed - On Water 2.5 mph/4 km/h Shipping Weight 2100 lbs/950 kg Tyres Goodyear Rawhide III AT25 x 11.50 - 9 NHS Vehicle Weight 2100 lbs/950 kg Unladen, 2420 lbs/1100 kg Unladen with Multi-purpose tracks, 3600 lbs/1633 kg Laden Ground Pressure Tyres Zero Penetration 5 PSI/34 kPa Ground Pressure Multi Purpose Tracks Zero Penetration 1.5 PSI/10 kPa Laden: 2.2 PSI/15 kPa 3" of Penetration 1.0 PSI/6.8 kPa Laden: 1.4 PSI/9.5 kPa Ground Pressure Snow Tracks Zero Penetration 0.7 PSI/4.8 kPa Laden: 1.0 PSI/6.8 kPa 3" of Penetration 0.6 PSI/4.1 kPa Laden: 0.9 PSI/6.1 kPa Ground Clearance 8"/200 mm to centre of lower body Operating Conditions All weather, all terrain, -40F to +104F (-40C to +40C) Transport Truck, trailer or helicopter lift